AEG Upgrade Parts

Sort By:  
Madbull Shark Red Hop Rubber Bucking

The 3 fins in the red hop rubber are designed to only feed one BB at a time and not allow for double feeding. A must for any DMR or high Rate Of Fire Airsofter. This package comes with 2 rubber bucking and 2 H-Nubs. The H-Nubs are often an item best to be forgotten about but if you are lucky, any it is worth a try, these may work with your hop unit. If the H-Nub works they are proven to increase your shot accuracy. Remember to experiment, mix and match your hop components to get the best out of your AEG. We recommend a minimum of 0.25g weight BB with this hop rubber.

Features:

  • 60° Hop Up Rubber
  • Recommended for use with 320fps - 500fps builds
  • Includes 2x H-Nubs, designed for improved accuracy results (please note these do not work in all AEG's)
  • 3x Thin inside lips to hold and feed one BB at a time, preventing double feeding issues
  • Incredibly popular item that we have stocked for years
  • Thick walled so will be incredibly snug in your hop unit once installed
  • Large surface area contact patch

Package Includes:

  • 60 Degree Shark Accelerator Hopup Bucking - 2pcs
£14.99
SHS 14 Steel Teeth Fibre Reinforced Lightweight Piston

14 Full Steel Tooth Lightweight Fibre Reinforced Piston for AEG's

This extremely lightweight piston is made from fibre reinforced composite with a high carbon steel track for extreme reliability. The piston body is further lightened due to the material and cut-out design, which increases return speed in high speed gearboxes allowing for an increased rate of fire.

£9.99
SHS Sector Gear Delay Chip

Gear sector chip which clips onto the sector gear and fits the space between sector gear and tappet plate

Basically this upgrade part enables the tappet plate to hold the air nozzle longer to allow more reliable BB Feeding in a modified high performance AEG

Even though it is such small upgrade gearbox part, it will guarantee an AEG's reliable performance

This parts has no side effects such as power loss or erosion of the tappet plate

As always, when upgrading an AEG it requires the necessary skill & technique to dissemble the gearbox, we can carry out this upgrade for you if you would prefer. Contact us for a price.

£2.99
650mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 650mm long x 6.03mm bore.

The essential upgrade for all AEG and some sniper airsoft guns.

£39.99
590mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 590mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£36.99
550mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 550mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£34.99
510mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 510mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£33.49
509mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 509mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£33.49
500mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 500mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£33.49
455mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 455mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£33.49
450mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 450mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£32.99
400mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 400mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£29.99
370mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 370mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£29.99
300mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 300mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£25.99
363mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 363mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£27.99
285mm 6.03mm AEG Stainless Inner Barrel

SHS/PPS Stainless Steel AEG Tightbore Precision Inner Barrel, 285mm long x 6.03mm bore.

The essential upgrade for all AEG airsoft guns.

£24.99
Prometheus Purple Hop Rubber Bucking

Prometheus Purple AEG Soft Type Hop Bucking - is a hop-up rubber designed for Marui Style Weapons known by many as the Prommy Purple, it has become the go to bucking for many experianced players and techs. It will fit almost all Airsoft AEGs on the market.

The bucking is made from Silicon and features an approx 50 Degree Nub, applying a moderate amount of hop to BBs. This should fit almost any weapon with an AEG Barrel.

The Prometheus Purple from Laylax is great for cold weather and the material will retain is elastic qualities, whereas standard rubbers will become hard when cold. This is perfect for any Airsoft Skirmisher who wants an upgraded hop-rubber for their AEG, or wants to range, accuracy and consistency.

Undoubtedly the best standard type hop bucking on the market.

£10.99
RA-Tech NPAS Kit for WE Open Bolt GBB

RA-TECH NPAS KIT for WE Open Bolt gas blowback rifles. 

The RA Tech NPAS (Negative Pressure Air System) enables the FPS of your rifle to be adjusted according to different site limits and changes in ambient temperature.  Take away uncertainties and enjoy your GBBR in much more locations/times of year.  

Kit fits all WE Open Bolt gas blowback rifles/SMG's that use a two part loading nozzle.

To better understand how the NPAS works - watch the video here.

£16.99
Madbull Blue 60° Hop Rubber Bucking

Please note that this rubber is specifically designed for AEG inner barrels but could be modified to fit other Airsoft RIFS. The rating of this hop rubber is 60 degrees and has been proven to handle any BB weight from 0.20g up to 0.36g. This is a bundle purchase where you get 2 hop rubbers and 2 nubs per order of this item. The nubs are often left out when installing the rubber sleeve into your Airsoft gun as the nubs apply allot of pressure. Experiment, mix and match your hop components to get the best out of your AEG. We recommend a minimum of 0.25g weight BB with this hop rubber.

Features:

  • 60° Hop Up Rubber
  • Recommended for use with 320fps - 360fps builds
  • Includes 2x nubs (same thickness)
  • Incredibly popular item that we have stocked for years
  • Thick walled so will be incredibly snug in your hop unit once installed
  • Large surface area contact patch

Package Includes:

  • 60 Degree Hopup Bucking - 2pcs
£15.49
Maple Leaf Macaron 75° AEG Hop Rubber Bucking

The contact patch inside is wider and longer spread than normally found too. This extends the amount of time your BB is under pressure, designed to improve your shot accuracy further down range. The Monster range of hop rubbers are perfect for skirmishers either looking to replace a damaged or torn rubber, or upgrade to a better quality hop set up to improve air seal and consistency in shot for shot accuracy.

Features:

  • 75° Hop-Up Rubber
  • Designed to be used with all BB weights but ideally over 0.25g
  • High performance bucking
  • External ribs for better air seal and alignment upon assembly
  • Engineered to boost range and accuracy depending on the rest of your components and maintenance
  • Maximises contact with BB across the internal contact patch
  • Specially designed wide contact patch for a wider surface area
  • Aligns BBs during loading and firing
  • Evenly Grips around the BB for an improved air seal
  • Operates in temperatures from -50°c to 230°c

Package Includes:

  • Macaron Hop Up Rubber for AEG

Special Instructions:

We recommend that this Hop-Up rubber should be used with 0.25g BBs and above.

£8.99
Per Page      1 - 20 of 22