MAXX Model M4 CNC Hop Chamber ME - SPORT with Tracer

£74.99
Click and Collect from our store Today
Quantity
Avavilable In-Store and Online

  • Machined from a solid aircraft aluminium block with tight tolerances to provide better accuracy, consistency, and durability
  • Manually opened to release BBs from inside hopup chamber by hand
  • The Dual UV LED Boards and Module set and Single UV LED Board w/ Clear Cover and Module set to glow BBs in the dark ready!

MAXX Model M4 CNC Hop Chamber ME - SPORT with Tracer

The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments. The hopup levers and concave nubs have also been re-engineered to work best with R-hop and Standard-Hop systems to keep the BBs shooting straight and accurate on every single shot.

The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BBs.

The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at the bottom and in the centre of the housing to ensure the hopup unit is exactly centered, straight and air tight, at all times, when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.

Another point to note is that, the Hopup Chamber ME Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside the hopup chamber by hand.

The Dual UV LED Boards and Module set is also included with this hopup chamber unit to glow Tracer BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad).

Includes:
1 x CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit
1 x Dual UV LED Boards and Module set
2 x Strong Clear Vinyl Cover set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring


Specification:
Overall Length: 51mm
Overall Height: 37.75mm
Hub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

Key Features:

  • Machined from a solid aircraft aluminium block with tight tolerances to provide better accuracy, consistency, and durability
  • Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA, ICS) M4/M16 Standard AEG series
  • Precision rotary dial design for fine hopup adjustments
  • Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
  • Removable Brass Threaded Slot Pin for setup and maintenance
  • Accepted the nozzle length from 21.00mm to 21.5mm
  • Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
  • Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
  • Equipped with 3 compression springs on top, at the bottom and in centre of housing to ensure the hopup unit is exactly centred, straight and air tight
  • Compatible with any V2 gearboxes with 11mm or 11.5mm bore Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
  • Manually opened to release BBs from inside hopup chamber by hand
  • The Dual UV LED Boards and Module set and Single UV LED Board w/ Clear Cover and Module set to glow BBs in the dark ready!

Compatible with most Tokyo Marui (include KRYTAC, except KWA, ICS) M4/M16 standard AEG version 2 gearbox

MX-HOP005SPL
chat Comments (0)
No customer reviews for the moment.

16 other products in the same category: